Ulster University Logo

Ulster Institutional Repository

Items where Research Institute is Engineering Research Institute > Engineering Composites

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type | No Grouping
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2004 | 2003 | 2002 | 2001
Number of items at this level: 49.

2013

Archer, E, Broderick, J, Buchanan, S and McIlhagger, AT (2013) Internal strain measurement and impact response of three-dimensional angle interlock woven carbon fibre composites. Journal of Reinforced Plastics, online . [Journal article]

Archer, E and McIlhagger, AT (2013) Internal strain measurement and cure monitoring of 3d angle interlock woven carbon fibre composites. Composites Part B: Engineering, available online . [Journal article]

2012

Archer, E, Buchanan, S, Kirby, S and McIlhagger, AT (2012) Evaluation of the Mechanical Performance and Commercial Opportunities of Thick Basalt Composite Structures. In: International Manufacturing Conference, IMC29, Belfast. IMC29. 5 pp. [Conference contribution]

Archer, E, Mulligan, R, Dixon, D, Buchanan, S, Stewart, G and McIlhagger, AT (2012) An investigation into thermoplastic matrix 3D woven carbon fibre composites. Journal of Reinforced Plastics and Composites, 31 (13). pp. 863-873. [Journal article]

Broderick, J, Archer, E, McMillan, A and McIlhagger, AT (2012) Internal Strain Measurement and Impact Response of 3D Woven Carbon Fibre Composites. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, , Venice, Italy. ECCM15. 8 pp. [Conference contribution]

Buchanan, S, Archer, E, Townsend, D, Jenkins, S, McIlhagger, AT and Quinn, Justin (2012) Determination of in-plane shear modulus of 3D woven composites with large repeat unit cells. Plastics, Rubber and Composites, 41 (4-5). pp. 194-198. [Journal article]

McMillan, A, Archer, E, McIlhagger, AT and Lelong, G (2012) Strength knock-down assessment of porosity in composites: modelling, characterising and specimen manufacture. Journal of Physics: Conference Series , 382 . [Journal article]

2011

Archer, E, King, S, Quinn, JP, Buchanan, S and McIlhagger, AT (2011) IMPACT DAMAGE ANALYSIS OF 3D WOVEN CARBON FIBRE COMPOSITES USING COMPUTED TOMOGRAPHY. In: ICCM-18 International Conference on Composite Materials, South Korea. The Korean Society for Composite Materials, Seoul, Korea. Vol W02 (3) 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Composites education to promote concurrent Engineering in the composite Industry. In: International Conference on Manufacturing of Advanced Composites , Belfast. IOM communications Ltd. 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Education to Promote Concurrent Manufacturing in the Composite Industry. In: An International Conference on Engineering Education , Belfast. iNEER . 6 pp. [Conference contribution]

2010

Archer, E, Buchanan, S, McIlhagger, AT and Quinn, JP (2010) The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites. Journal of Reinforced Plastics and Composites, 29 (20). pp. 3162-3170. [Journal article]

Buchanan, S, Grigorash, A, Archer, E, McIlhagger, AT and Quinn, JP (2010) Analytical elastic stiffness model for 3D woven orthogonal interlock composites. Composites Science and Technology, 70 . pp. 1597-1604. [Journal article]

Buchanan, S, Grigorash, A, Quinn, JP, McIlhagger, AT and Young, C (2010) Edit modelling the geometry of the repeat unit cell of three-dimensional weave architectures. Journal of Textile Institute, 101 (7). pp. 679-685. [Journal article]

Buchanan, S, Quinn, JP, McIlhagger, AT, Grigorash, A and Archer, E (2010) Modeling the geometric characteristics of five-dimensionally woven composites. Journal of Reinforced Plastics and Composites , 29 (23). 3475-3479 . [Journal article]

Dixon, D, McIlhagger, AT and Dooher, T (2010) Multiwalled CarbonNanotube/Polysulfone Composites. Journal of Thermoplastic Composite Materials, 24 (4). pp. 499-515. [Journal article]

2009

Archer, E (2009) Getting the green light. MATERIALS WORLD, 17 (4). pp. 34-35. [Journal article]

Archer, E, McIlhagger, AT, Buchanan, S and Dixon, D (2009) Reuse of waste carbon fibre by compounding with thermoplastic polymers. In: 17th International Conference on Composite Materials, UK. UNSPECIFIED. 9 pp. [Conference contribution]

Archer, E, McIlhagger, AT, McIlhagger, R, Mallon, P and Ó Brádaigh, C (2009) Industrial cure monitoring of CBT using DEA for wind energy. International Journal of Computational Materials Science and Surface Engineering, 2 (1-2). pp. 91-98. [Journal article]

Buchanan, S, Grigorash, A, McIlhagger, AT, Quinn, JP and Archer, E (2009) An analyltical model to predict the stiffness of three-dimensional woven angle interlock composites. In: 17th International Conference on Composite Materials, UK. IOM Communications. 7 pp. [Conference contribution]

Jenkins, P, Stewart, G, McIlhagger, AT, Quinn, JP, Archer, E and Wilson, S (2009) Evaluation of two mixing techniques for optimised dispersion and distribution of nano silica particles in epoxy resin. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

King, RS, Stewart, G, McIlhagger, AT and Quinn, JP (2009) The Influence of Through-The-Thickness Binder Yarn Count on Fibre Volume Fraction, Crimp and Damage Tolerance Within 3D Woven Carbon Fibre Composites. POLYMERS &POLYMER COMPOSITES, 17 (5). pp. 303-312. [Journal article]

Soden, Julie, Stewart, Graeme, Campbell, Donna and McIlhagger, Alistair (2009) Manufacture and Testing of 3D Woven Natural Fibre Composites. In: ICCM-17 International Conference on Composite Materials, EICC Edinburgh International Conference Centre. Institute of Materials,Minerals and Mining. 11 pp. [Conference contribution]

Stewart, G, McIlhagger, AT, Quinn, JP and Jenkins, P (2009) Fabrication of epoxy/organoclay nanocomposites. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

2008

Archer, E, Buchanan, S, McIlhagger, AT, Quinn, JP and Morgan, M (2008) An Investigation on the Effect of 3D Weaving on Carbon Fibre Tows, Fabrics and Composites. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 9 pp. [Conference contribution]

Borealis Technology OY, Incorporated in Finland (2008) One shot foaming process for rotomoulding. [Patent]

Archer, E, McIlhagger, AT, McIlhagger, R, Quinn, JP, Mallon, P and Bradaigh, CO (2008) Monitoring the Degree of Conversion of Cyclic Butylene Terephthalate using Dielectric Analysis. POLYMERS & POLYMER COMPOSITES, 16 (6). pp. 365-373. [Journal article]

National University of Ireland, Galway, Galway (IE), EireComposites Teoranta, Spiddal (2008) Composite articles comprising in-situ-polymerisable thermoplastic material and processes for their construction. [Patent]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2008) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 2 - Mechanical properties. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 334-341. [Journal article]

Quinn, JP, McIlhagger, AT and McIlhagger, R (2008) Examination of the failure of 3D woven composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 273-283. [Journal article]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Wilson, S, Simpson, D and Wenger, W (2008) 5 Axis Weaving-Technology for the Next Generations of Aircraft-Mechanical Performance of Multiaxis Weave Structures. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 5 pp. [Conference contribution]

2007

Archer, E, Harkin-Jones, E, Kearns, MP and Fatnes, A-M (2007) The rotational molding characteristics of metallocene polyethylene Skin/Foam structures. JOURNAL OF CELLULAR PLASTICS, 43 (6). pp. 491-504. [Journal article]

Dixon, D, McIlhagger, AT, Crangle, AA, Mcilhagger, R and Mccracken, K (2007) Seal properties of medical packaging materials at elevated temperature. Journal of Adhesion Science and Technology, 21 (15). pp. 1529-1537. [Journal article]

King, S, Stewart, G, McIlhagger, AT and Quinn, JP (2007) Incremental damage development in a 3D woven carbon fibre composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 521-533. [Journal article]

McIlhagger, AT, Archer, E and Quinn, JP (2007) Investigation of factors affecting dielectric data and the impact on interpretation of processing parameters in complex cure cycles. In: 28th International Conference of the Society for the Advancement of Materials and Process Engineering, Paris. UNSPECIFIED. 6 pp. [Conference contribution]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2007) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 1 - Impact resistance. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 38 (3). pp. 795-801. [Journal article]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Ridgeway, K, Ganeshmal, M, King, RS and Stewart, G (2007) The design and manufacture of advanced 3D woven hybrid composite materials. POLYMERS & POLYMER COMPOSITES, 15 (8). pp. 597-604. [Journal article]

Stewart, G, McIlhagger, AT, Quinn, JP and King, S (2007) An investigation into the effect of compaction on the mechanical performance of a 3D reinforced advanced composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 535-543. [Journal article]

2004

Archer, E, Harkin-Jones, E, Kearns, MP and Fatnes, AM (2004) Processing characteristics and mechanical properties of metallocene catalyzed linear low-density polyethylene foams for rotational molding. POLYMER ENGINEERING AND SCIENCE, 44 (4). pp. 638-647. [Journal article]

Borcia, G, Brown, NMD, Dixon, D and McIlhagger, R (2004) The effect of an air-dielectric barrier discharge on the surface properties and peel strength of medical packaging materials. SURFACE & COATINGS TECHNOLOGY, 179 (1). pp. 70-77. [Journal article]

Rogers, PPJ, McIlhagger, AT, McIlhagger, R and Quinn, JP (2004) Stabilisation of 3D preforms with thermoplastic monofilament for advanced composite manufacture. POLYMERS & POLYMER COMPOSITES, 12 (6). pp. 511-517. [Journal article]

2003

Archer, E, Harkin-Jones, E, Kearns, MP and Fatnes, AM (2003) Investigation of the processing characteristics and mechanical properties of metallocene-catalysed polyethylene foams for rotational moulding. JOURNAL OF CELLULAR PLASTICS, 39 (6). pp. 487-497. [Journal article]

Dixon, D, Crangle, AA, McIlhagger, R and McCracken, K (2003) High temperature peel properties of medical packaging materials. In: ANTEC Annual Technical Conference, Nashvill, USA. UNSPECIFIED. 4 pp. [Conference contribution]

Dixon, D, Crangle, AA, McIlhagger, R and McCracken , K (2003) Investigating the High-Temperature Peel Properties of Medical Packaging Materials. In: Annual Technical Conference - ANTEC, Conference Proceedings, Nashville, TN, United states. UNSPECIFIED. 3 pp. [Conference contribution]

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Editorial to: ICMAC conference - September 2001. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 469-473. [Journal article]

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Guest editorial to ICMAC conference - September 2001. Composites - Part A: Applied Science and Manufacturing, 34 (6). pp. 469-473. [Journal article]

Quinn, JP, McIlhagger, R and McIlhagger, AT (2003) A modified system for design and analysis of 3D woven preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 503-509. [Journal article]

Rezvani, S, Prasad, G, Dixon, D and McIlhagger, R (2003) An intelligent approach to generating improved product formulation for an optimal manufacturing route. In: 2003 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS, VOLS 1-5, CONFERENCE PROCEEDINGS, WASHINGTON, D.C., . UNSPECIFIED. 5 pp. [Conference contribution]

2002

Dixon, D, Crangle, AA, McIlhagger, R and Edwards, R (2002) The Effect of Sealing Parameters on the Fracture Mechanism and Peel Properties of Medical Packaging Materials. JOURNAL OF APPLIED MEDICAL POLYMERS, 6 (1). pp. 30-34. [Journal article]

2001

Quinn, JP, Hill, BJ and McIlhagger, R (2001) An integrated design system for the manufacture and analysis of 3-D woven preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 32 (7). pp. 911-914. [Journal article]

This list was generated on Wed Apr 23 02:33:53 2014 BST.