Ulster University Logo

Ulster Institutional Repository

Items where Research Institute is Engineering Research Institute > Advanced Metal Forming

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type | No Grouping
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2004 | 2003 | 2002 | 2001 | 1999
Number of items at this level: 29.

2013

Leacock, AG (2013) A Novel Process for the Manufacture of Extended Laminar FlowLipskins. Key Engineering Materials, 549 . pp. 3-12. [Journal article]

Leacock, AG, howe, C, Brown, D, Lademo, O and Deering, A (2013) Evolution of mechanical properties in a 7075 Al-alloy subject to natural ageing. Materials and Design, 49 . pp. 160-167. [Journal article]

Volk, G, Brown, D and Leacock, AG (2013) Profile correction of a stretch formed aluminium alloy during artificial ageing. Key Engineering Materials, 549 . pp. 213-219. [Journal article]

2012

Leacock, AG (2012) The Future of Sheet Metal Forming Research. Materials and Manufacturing Processes, 27 (4). pp. 366-369. [Journal article]

Leacock, AG, McCracken, D, Brown, D and McMurray, R (2012) Numerical Simulation of the Four Roll Bending Process. Materials and Manufacturing Processes, 27 (4). pp. 370-376. [Journal article]

2011

Anderson, N, Brown, D, McMurray, R and Leacock, AG (2011) The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy. AIP Conference Proceedings, 1353 . pp. 1435-1440. [Journal article]

McMurray, R, Leacock, AG and Brown, D (2011) The Influence of Through-Thickness Material Property Variation on Stretch Forming Springback. Key Engineering Materials, 473 . pp. 436-443. [Journal article]

2010

Kilpatrick, W, Brown, D, McMurray, R and Leacock, AG (2010) The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration. Materials Science and Engineering: A, 527 (29-30). p. 7557. [Journal article]

Kilpatrick, W, Brown, D, McMurray, R and Leacock, AG (2010) The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration. Materials Science and Engineering: A, 527 (29-30). pp. 7557-7564. [Journal article]

Leacock, AG, Ludlow, M, Howe, C and McMurray, R (2010) Analysis of the flexforming process using PAMSTAMP 2G. In: ESI Global Forum 2010, Munich. N/A. [Conference contribution]

Leacock, AG, McCracken, D, Brown, D and McMurray, R (2010) Numerical Simulation of the four roll bending process. In: MATADOR, Manchester. Springer. 4 pp. [Conference contribution]

2009

Anderson, N, Leacock, A, McMurray, R and Brown, D (2009) The evolution of yielding in 7075-O aluminium alloy: experimental observations and modelling. International Journal of Material Forming, 2 (S1). p. 403. [Journal article]

Bressan, J and Leacock, A (2009) Influence of pre-strain on the formability of 2024 aluminium alloy. International Journal of Material Forming, 2 (S1). p. 475. [Journal article]

McMurray, R, O’Donnell, M, Leacock, A and Brown, D (2009) Modelling the Effect of Pre-Strain and Inter-Stage Annealing on the Stretch Forming of a 2024 Aluminium Alloy. Key Engineering Materials, 410-411 . p. 421. [Journal article]

2008

University of Ulster (2008) Method for forming a sector for a nacelle lipskin. [Patent]

O’Donnell, M, Banabic, D, Leacock, A, Brown, D and McMurray, R (2008) The Effect of Pre-Strain and Inter-Stage Annealing on the Formability of a 2024 Aluminium Alloy. International Journal of Material Forming, 1 (S1). p. 253. [Journal article]

O’Donnell, M, Leacock, A, Banabic, D, Brown, D and McMurray, R (2008) The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy. International Journal of Material Forming, 1 (S1). p. 257. [Journal article]

Scott, BG, Brown, RR, Leacock, A and Salter, CC (2008) Some observations on the technology of the English Cannon, Chapter 8. In: Great Guns Like Thunder: The Cannon from The City of Derry. Guildhall Press, pp. 179-198. ISBN 1906271100 [Book section]

2007

Leacock, AG, McMurray, R, Brown, D and Poston, K (2007) The influence of strain rate variations on the appearance of serrated yielding in 2024-T3 Al-clad aluminium alloy. In: 10th ESAFORM Conference on Material Forming - AIP, Zaragoza, Spain. A I P. 6 pp. [Conference contribution]

McMurray, R, Leacock, AG and Brown, D (2007) Double curvature springback in stretch formed 2024-T3 aluminium. In: SheMet 2007, Palermo, Italy. Trans Tech Publications. 8 pp. [Conference contribution]

McMurray, R, Leacock, AG and Brown, D (2007) The influence of cladding on the springback of 2024-T3 aluminium alloy. In: AEPA 2006, Nagoya, Japan. Trans Tech Publications. 6 pp. [Conference contribution]

2006

Leacock, A (2006) A mathematical description of orthotropy in sheet metals. Journal of the Mechanics and Physics of Solids, 54 (2). pp. 425-444. [Journal article]

2004

Gilmour, Ken, Leacock, AG and Ashbridge, MTJ (2004) The influence of plastic strain ratios on the numerical modelling of stretch forming. Journal of Materials Processing Technology, 152 (1). pp. 116-125. [Journal article]

2003

Leacock, AG, Gilmour, Ken and McMurray, R (2003) The effect of prestrain on the springback of aluminium alloys during simple bending. In: 10th International Conference on Sheet Metals (SheMet ), University of Ulster, Northern Ireland. University of Ulster. 10 pp. [Conference contribution]

2002

Gilmour, Ken, Paul, S and Leacock, AG (2002) The influence of lubricant film thickness on friction coefficients during slow speed deep drawing operations. Journal of Tribology, 124 (4). pp. 846-851. [Journal article]

2001

Ashbridge, MTJ, Gilmour, Ken and Leacock, AG (2001) Establishing the effectiveness of a lubricant in the deep drawing process by means of prior loading duration variation. Journal of Engineering Tribology, 215 (1). pp. 19-24. [Journal article]

Gilmour, Ken, Leacock, AG and Ashbridge, MTJ (2001) The determination of in plane shear characteristics of aluminium alloys. Journal of Testing and Evaluation, 29 (2). pp. 131-137. [Journal article]

Leacock, AG, Gilmour, Ken and Poston, K (2001) The development of a procedure for the optimisation of stretch forming machine settings during the production of double curved skin components. In: AeroMAT 2001, Longbeach California, USA. ASM. 10 pp. [Conference contribution]

1999

Brown, D and Morgan, M (1999) Solid modelling of a woven textile reinforcement: A prototype system for the automatic extraction of geometric data. Polymers and Polymer Composites, 7 (7). pp. 461-463. [Journal article]

This list was generated on Wed Oct 22 05:21:11 2014 BST.