Ulster University Logo

Ulster Institutional Repository

Items where Research Institute is Engineering Research Institute > Advanced Metal Forming

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type | No Grouping
Number of items at this level: 29.

Leacock, AG (2013) A Novel Process for the Manufacture of Extended Laminar FlowLipskins. Key Engineering Materials, 549 . pp. 3-12. [Journal article]

Leacock, AG, howe, C, Brown, D, Lademo, O and Deering, A (2013) Evolution of mechanical properties in a 7075 Al-alloy subject to natural ageing. Materials and Design, 49 . pp. 160-167. [Journal article]

Volk, G, Brown, D and Leacock, AG (2013) Profile correction of a stretch formed aluminium alloy during artificial ageing. Key Engineering Materials, 549 . pp. 213-219. [Journal article]

Leacock, AG (2012) The Future of Sheet Metal Forming Research. Materials and Manufacturing Processes, 27 (4). pp. 366-369. [Journal article]

Leacock, AG, McCracken, D, Brown, D and McMurray, R (2012) Numerical Simulation of the Four Roll Bending Process. Materials and Manufacturing Processes, 27 (4). pp. 370-376. [Journal article]

Anderson, N, Brown, D, McMurray, R and Leacock, AG (2011) The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy. AIP Conference Proceedings, 1353 . pp. 1435-1440. [Journal article]

McMurray, R, Leacock, AG and Brown, D (2011) The Influence of Through-Thickness Material Property Variation on Stretch Forming Springback. Key Engineering Materials, 473 . pp. 436-443. [Journal article]

Kilpatrick, W, Brown, D, McMurray, R and Leacock, AG (2010) The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration. Materials Science and Engineering: A, 527 (29-30). p. 7557. [Journal article]

Kilpatrick, W, Brown, D, McMurray, R and Leacock, AG (2010) The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration. Materials Science and Engineering: A, 527 (29-30). pp. 7557-7564. [Journal article]

Leacock, AG, Ludlow, M, Howe, C and McMurray, R (2010) Analysis of the flexforming process using PAMSTAMP 2G. In: ESI Global Forum 2010, Munich. N/A. [Conference contribution]

Leacock, AG, McCracken, D, Brown, D and McMurray, R (2010) Numerical Simulation of the four roll bending process. In: MATADOR, Manchester. Springer. 4 pp. [Conference contribution]

Anderson, N, Leacock, A, McMurray, R and Brown, D (2009) The evolution of yielding in 7075-O aluminium alloy: experimental observations and modelling. International Journal of Material Forming, 2 (S1). p. 403. [Journal article]

Bressan, J and Leacock, A (2009) Influence of pre-strain on the formability of 2024 aluminium alloy. International Journal of Material Forming, 2 (S1). p. 475. [Journal article]

McMurray, R, O’Donnell, M, Leacock, A and Brown, D (2009) Modelling the Effect of Pre-Strain and Inter-Stage Annealing on the Stretch Forming of a 2024 Aluminium Alloy. Key Engineering Materials, 410-411 . p. 421. [Journal article]

University of Ulster (2008) Method for forming a sector for a nacelle lipskin. [Patent]

O’Donnell, M, Banabic, D, Leacock, A, Brown, D and McMurray, R (2008) The Effect of Pre-Strain and Inter-Stage Annealing on the Formability of a 2024 Aluminium Alloy. International Journal of Material Forming, 1 (S1). p. 253. [Journal article]

O’Donnell, M, Leacock, A, Banabic, D, Brown, D and McMurray, R (2008) The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy. International Journal of Material Forming, 1 (S1). p. 257. [Journal article]

Scott, BG, Brown, RR, Leacock, A and Salter, CC (2008) Some observations on the technology of the English Cannon, Chapter 8. In: Great Guns Like Thunder: The Cannon from The City of Derry. Guildhall Press, pp. 179-198. ISBN 1906271100 [Book section]

Leacock, AG, McMurray, R, Brown, D and Poston, K (2007) The influence of strain rate variations on the appearance of serrated yielding in 2024-T3 Al-clad aluminium alloy. In: 10th ESAFORM Conference on Material Forming - AIP, Zaragoza, Spain. A I P. 6 pp. [Conference contribution]

McMurray, R, Leacock, AG and Brown, D (2007) Double curvature springback in stretch formed 2024-T3 aluminium. In: SheMet 2007, Palermo, Italy. Trans Tech Publications. 8 pp. [Conference contribution]

McMurray, R, Leacock, AG and Brown, D (2007) The influence of cladding on the springback of 2024-T3 aluminium alloy. In: AEPA 2006, Nagoya, Japan. Trans Tech Publications. 6 pp. [Conference contribution]

Leacock, A (2006) A mathematical description of orthotropy in sheet metals. Journal of the Mechanics and Physics of Solids, 54 (2). pp. 425-444. [Journal article]

Gilmour, Ken, Leacock, AG and Ashbridge, MTJ (2004) The influence of plastic strain ratios on the numerical modelling of stretch forming. Journal of Materials Processing Technology, 152 (1). pp. 116-125. [Journal article]

Leacock, AG, Gilmour, Ken and McMurray, R (2003) The effect of prestrain on the springback of aluminium alloys during simple bending. In: 10th International Conference on Sheet Metals (SheMet ), University of Ulster, Northern Ireland. University of Ulster. 10 pp. [Conference contribution]

Gilmour, Ken, Paul, S and Leacock, AG (2002) The influence of lubricant film thickness on friction coefficients during slow speed deep drawing operations. Journal of Tribology, 124 (4). pp. 846-851. [Journal article]

Ashbridge, MTJ, Gilmour, Ken and Leacock, AG (2001) Establishing the effectiveness of a lubricant in the deep drawing process by means of prior loading duration variation. Journal of Engineering Tribology, 215 (1). pp. 19-24. [Journal article]

Gilmour, Ken, Leacock, AG and Ashbridge, MTJ (2001) The determination of in plane shear characteristics of aluminium alloys. Journal of Testing and Evaluation, 29 (2). pp. 131-137. [Journal article]

Leacock, AG, Gilmour, Ken and Poston, K (2001) The development of a procedure for the optimisation of stretch forming machine settings during the production of double curved skin components. In: AeroMAT 2001, Longbeach California, USA. ASM. 10 pp. [Conference contribution]

Brown, D and Morgan, M (1999) Solid modelling of a woven textile reinforcement: A prototype system for the automatic extraction of geometric data. Polymers and Polymer Composites, 7 (7). pp. 461-463. [Journal article]

This list was generated on Wed Apr 23 02:37:33 2014 BST.