Ulster University Logo

Ulster Institutional Repository

Browse by Ulster Authors and Editors

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type | No Grouping
Number of items: 30.

Conference contribution

Archer, E, King, S, Quinn, JP, Buchanan, S and McIlhagger, AT (2011) IMPACT DAMAGE ANALYSIS OF 3D WOVEN CARBON FIBRE COMPOSITES USING COMPUTED TOMOGRAPHY. In: ICCM-18 International Conference on Composite Materials, South Korea. The Korean Society for Composite Materials, Seoul, Korea. Vol W02 (3) 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Composites education to promote concurrent Engineering in the composite Industry. In: International Conference on Manufacturing of Advanced Composites , Belfast. IOM communications Ltd. 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Education to Promote Concurrent Manufacturing in the Composite Industry. In: An International Conference on Engineering Education , Belfast. iNEER . 6 pp. [Conference contribution]

Buchanan, S, Grigorash, A, McIlhagger, AT, Quinn, JP and Archer, E (2009) An analyltical model to predict the stiffness of three-dimensional woven angle interlock composites. In: 17th International Conference on Composite Materials, UK. IOM Communications. 7 pp. [Conference contribution]

Jenkins, P, Stewart, G, McIlhagger, AT, Quinn, JP, Archer, E and Wilson, S (2009) Evaluation of two mixing techniques for optimised dispersion and distribution of nano silica particles in epoxy resin. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

Stewart, G, McIlhagger, AT, Quinn, JP and Jenkins, P (2009) Fabrication of epoxy/organoclay nanocomposites. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

Archer, E, Buchanan, S, McIlhagger, AT, Quinn, JP and Morgan, M (2008) An Investigation on the Effect of 3D Weaving on Carbon Fibre Tows, Fabrics and Composites. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 9 pp. [Conference contribution]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Wilson, S, Simpson, D and Wenger, W (2008) 5 Axis Weaving-Technology for the Next Generations of Aircraft-Mechanical Performance of Multiaxis Weave Structures. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 5 pp. [Conference contribution]

McIlhagger, AT, Archer, E and Quinn, JP (2007) Investigation of factors affecting dielectric data and the impact on interpretation of processing parameters in complex cure cycles. In: 28th International Conference of the Society for the Advancement of Materials and Process Engineering, Paris. UNSPECIFIED. 6 pp. [Conference contribution]

Morgan, M, Quinn, JP and McIlhagger, AT (2006) The effect of weft density variation on tow geometry in woven reinforced composite materials. In: International Manufacturing Conference, Belfast. IMC Conference Proceedings. 5 pp. [Conference contribution]

Morgan, M, Brown, D, Quinn, JP and McIlhagger, R (2002) Computer modelling of woven textile reinforced composite materials. In: International Manufacturing Conference, Belfast. IMC Conference Proceedings. 6 pp. [Conference contribution]

Journal article

Buchanan, S, Archer, E, Townsend, D, Jenkins, S, McIlhagger, AT and Quinn, Justin (2012) Determination of in-plane shear modulus of 3D woven composites with large repeat unit cells. Plastics, Rubber and Composites, 41 (4-5). pp. 194-198. [Journal article]

Archer, E, Buchanan, S, McIlhagger, AT and Quinn, JP (2010) The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites. Journal of Reinforced Plastics and Composites, 29 (20). pp. 3162-3170. [Journal article]

Buchanan, S, Grigorash, A, Archer, E, McIlhagger, AT and Quinn, JP (2010) Analytical elastic stiffness model for 3D woven orthogonal interlock composites. Composites Science and Technology, 70 . pp. 1597-1604. [Journal article]

Buchanan, S, Grigorash, A, Quinn, JP, McIlhagger, AT and Young, C (2010) Edit modelling the geometry of the repeat unit cell of three-dimensional weave architectures. Journal of Textile Institute, 101 (7). pp. 679-685. [Journal article]

Buchanan, S, Quinn, JP, McIlhagger, AT, Grigorash, A and Archer, E (2010) Modeling the geometric characteristics of five-dimensionally woven composites. Journal of Reinforced Plastics and Composites , 29 (23). 3475-3479 . [Journal article]

King, RS, Stewart, G, McIlhagger, AT and Quinn, JP (2009) The Influence of Through-The-Thickness Binder Yarn Count on Fibre Volume Fraction, Crimp and Damage Tolerance Within 3D Woven Carbon Fibre Composites. POLYMERS &POLYMER COMPOSITES, 17 (5). pp. 303-312. [Journal article]

Archer, E, McIlhagger, AT, McIlhagger, R, Quinn, JP, Mallon, P and Bradaigh, CO (2008) Monitoring the Degree of Conversion of Cyclic Butylene Terephthalate using Dielectric Analysis. POLYMERS & POLYMER COMPOSITES, 16 (6). pp. 365-373. [Journal article]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2008) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 2 - Mechanical properties. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 334-341. [Journal article]

Quinn, JP, McIlhagger, AT and McIlhagger, R (2008) Examination of the failure of 3D woven composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 273-283. [Journal article]

King, S, Stewart, G, McIlhagger, AT and Quinn, JP (2007) Incremental damage development in a 3D woven carbon fibre composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 521-533. [Journal article]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2007) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 1 - Impact resistance. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 38 (3). pp. 795-801. [Journal article]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Ridgeway, K, Ganeshmal, M, King, RS and Stewart, G (2007) The design and manufacture of advanced 3D woven hybrid composite materials. POLYMERS & POLYMER COMPOSITES, 15 (8). pp. 597-604. [Journal article]

Stewart, G, McIlhagger, AT, Quinn, JP and King, S (2007) An investigation into the effect of compaction on the mechanical performance of a 3D reinforced advanced composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 535-543. [Journal article]

Rogers, PPJ, McIlhagger, AT, McIlhagger, R and Quinn, JP (2004) Stabilisation of 3D preforms with thermoplastic monofilament for advanced composite manufacture. POLYMERS & POLYMER COMPOSITES, 12 (6). pp. 511-517. [Journal article]

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Editorial to: ICMAC conference - September 2001. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 469-473. [Journal article]

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Guest editorial to ICMAC conference - September 2001. Composites - Part A: Applied Science and Manufacturing, 34 (6). pp. 469-473. [Journal article]

Quinn, JP, McIlhagger, R and McIlhagger, AT (2003) A modified system for design and analysis of 3D woven preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 503-509. [Journal article]

Quinn, JP, Hill, BJ and McIlhagger, R (2001) An integrated design system for the manufacture and analysis of 3-D woven preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 32 (7). pp. 911-914. [Journal article]

Lemoine, Patrick, Zhao, ZF, Quinn, JP, Ogwu, AA, McLaughlin, JAD, Maguire, PD, McGinnity, F and Shi, X (2000) Nanoindentation and scratch resistance testing on magnetic tape heads coated with ultra-thin amorphous carbon layers. Wear, 244 . pp. 79-84. [Journal article]

This list was generated on Fri Apr 25 06:29:29 2014 BST.