Ulster University Logo

Ulster Institutional Repository

Browse by Ulster Authors and Editors

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type | No Grouping
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2004 | 2003
Number of items: 38.

2013

Archer, E, Broderick, J, Buchanan, S and McIlhagger, AT (2013) Internal strain measurement and impact response of three-dimensional angle interlock woven carbon fibre composites. Journal of Reinforced Plastics, online . [Journal article]

Archer, E and McIlhagger, AT (2013) Internal strain measurement and cure monitoring of 3d angle interlock woven carbon fibre composites. Composites Part B: Engineering, available online . [Journal article]

2012

Archer, E, Buchanan, S, Kirby, S and McIlhagger, AT (2012) Evaluation of the Mechanical Performance and Commercial Opportunities of Thick Basalt Composite Structures. In: International Manufacturing Conference, IMC29, Belfast. IMC29. 5 pp. [Conference contribution]

Archer, E, Mulligan, R, Dixon, D, Buchanan, S, Stewart, G and McIlhagger, AT (2012) An investigation into thermoplastic matrix 3D woven carbon fibre composites. Journal of Reinforced Plastics and Composites, 31 (13). pp. 863-873. [Journal article]

Broderick, J, Archer, E, McMillan, A and McIlhagger, AT (2012) Internal Strain Measurement and Impact Response of 3D Woven Carbon Fibre Composites. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, , Venice, Italy. ECCM15. 8 pp. [Conference contribution]

Buchanan, S, Archer, E, Townsend, D, Jenkins, S, McIlhagger, AT and Quinn, Justin (2012) Determination of in-plane shear modulus of 3D woven composites with large repeat unit cells. Plastics, Rubber and Composites, 41 (4-5). pp. 194-198. [Journal article]

McMillan, A, Archer, E, McIlhagger, AT and Lelong, G (2012) Strength knock-down assessment of porosity in composites: modelling, characterising and specimen manufacture. Journal of Physics: Conference Series , 382 . [Journal article]

2011

Archer, E, King, S, Quinn, JP, Buchanan, S and McIlhagger, AT (2011) IMPACT DAMAGE ANALYSIS OF 3D WOVEN CARBON FIBRE COMPOSITES USING COMPUTED TOMOGRAPHY. In: ICCM-18 International Conference on Composite Materials, South Korea. The Korean Society for Composite Materials, Seoul, Korea. Vol W02 (3) 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Composites education to promote concurrent Engineering in the composite Industry. In: International Conference on Manufacturing of Advanced Composites , Belfast. IOM communications Ltd. 6 pp. [Conference contribution]

Archer, E, McIlhagger, AT and Quinn, JP (2011) Education to Promote Concurrent Manufacturing in the Composite Industry. In: An International Conference on Engineering Education , Belfast. iNEER . 6 pp. [Conference contribution]

2010

Archer, E, Buchanan, S, McIlhagger, AT and Quinn, JP (2010) The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites. Journal of Reinforced Plastics and Composites, 29 (20). pp. 3162-3170. [Journal article]

Buchanan, S, Grigorash, A, Archer, E, McIlhagger, AT and Quinn, JP (2010) Analytical elastic stiffness model for 3D woven orthogonal interlock composites. Composites Science and Technology, 70 . pp. 1597-1604. [Journal article]

Buchanan, S, Grigorash, A, Quinn, JP, McIlhagger, AT and Young, C (2010) Edit modelling the geometry of the repeat unit cell of three-dimensional weave architectures. Journal of Textile Institute, 101 (7). pp. 679-685. [Journal article]

Buchanan, S, Quinn, JP, McIlhagger, AT, Grigorash, A and Archer, E (2010) Modeling the geometric characteristics of five-dimensionally woven composites. Journal of Reinforced Plastics and Composites , 29 (23). 3475-3479 . [Journal article]

Dixon, D, McIlhagger, AT and Dooher, T (2010) Multiwalled CarbonNanotube/Polysulfone Composites. Journal of Thermoplastic Composite Materials, 24 (4). pp. 499-515. [Journal article]

2009

Archer, E, McIlhagger, AT, Buchanan, S and Dixon, D (2009) Reuse of waste carbon fibre by compounding with thermoplastic polymers. In: 17th International Conference on Composite Materials, UK. UNSPECIFIED. 9 pp. [Conference contribution]

Archer, E, McIlhagger, AT, McIlhagger, R, Mallon, P and Ó Brádaigh, C (2009) Industrial cure monitoring of CBT using DEA for wind energy. International Journal of Computational Materials Science and Surface Engineering, 2 (1-2). pp. 91-98. [Journal article]

Buchanan, S, Grigorash, A, McIlhagger, AT, Quinn, JP and Archer, E (2009) An analyltical model to predict the stiffness of three-dimensional woven angle interlock composites. In: 17th International Conference on Composite Materials, UK. IOM Communications. 7 pp. [Conference contribution]

Jenkins, P, Stewart, G, McIlhagger, AT, Quinn, JP, Archer, E and Wilson, S (2009) Evaluation of two mixing techniques for optimised dispersion and distribution of nano silica particles in epoxy resin. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

King, RS, Stewart, G, McIlhagger, AT and Quinn, JP (2009) The Influence of Through-The-Thickness Binder Yarn Count on Fibre Volume Fraction, Crimp and Damage Tolerance Within 3D Woven Carbon Fibre Composites. POLYMERS &POLYMER COMPOSITES, 17 (5). pp. 303-312. [Journal article]

Soden, Julie, Stewart, Graeme, Campbell, Donna and McIlhagger, Alistair (2009) Manufacture and Testing of 3D Woven Natural Fibre Composites. In: ICCM-17 International Conference on Composite Materials, EICC Edinburgh International Conference Centre. Institute of Materials,Minerals and Mining. 11 pp. [Conference contribution]

Stewart, G, McIlhagger, AT, Quinn, JP and Jenkins, P (2009) Fabrication of epoxy/organoclay nanocomposites. In: International Conference for Manufacturing of Advanced Composites, Belfast, United Kingdom. IOM Communications. 1 pp. [Conference contribution]

2008

Archer, E, Buchanan, S, McIlhagger, AT, Quinn, JP and Morgan, M (2008) An Investigation on the Effect of 3D Weaving on Carbon Fibre Tows, Fabrics and Composites. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 9 pp. [Conference contribution]

Archer, E, McIlhagger, AT, McIlhagger, R, Quinn, JP, Mallon, P and Bradaigh, CO (2008) Monitoring the Degree of Conversion of Cyclic Butylene Terephthalate using Dielectric Analysis. POLYMERS & POLYMER COMPOSITES, 16 (6). pp. 365-373. [Journal article]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2008) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 2 - Mechanical properties. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 334-341. [Journal article]

Quinn, JP, McIlhagger, AT and McIlhagger, R (2008) Examination of the failure of 3D woven composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39 (2). pp. 273-283. [Journal article]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Wilson, S, Simpson, D and Wenger, W (2008) 5 Axis Weaving-Technology for the Next Generations of Aircraft-Mechanical Performance of Multiaxis Weave Structures. In: RECENT ADVANCES IN TEXTILE COMPOSITES. UNSPECIFIED. 5 pp. [Conference contribution]

2007

Dixon, D, McIlhagger, AT, Crangle, AA, Mcilhagger, R and Mccracken, K (2007) Seal properties of medical packaging materials at elevated temperature. Journal of Adhesion Science and Technology, 21 (15). pp. 1529-1537. [Journal article]

King, S, Stewart, G, McIlhagger, AT and Quinn, JP (2007) Incremental damage development in a 3D woven carbon fibre composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 521-533. [Journal article]

McIlhagger, AT, Archer, E and Quinn, JP (2007) Investigation of factors affecting dielectric data and the impact on interpretation of processing parameters in complex cure cycles. In: 28th International Conference of the Society for the Advancement of Materials and Process Engineering, Paris. UNSPECIFIED. 6 pp. [Conference contribution]

McIlhagger, R, Quinn, JP, McIlhagger, AT, Wilson, S, Simpson, D and Wenger, W (2007) The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 1 - Impact resistance. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 38 (3). pp. 795-801. [Journal article]

Quinn, JP, McIlhagger, AT, McIlhagger, R, Ridgeway, K, Ganeshmal, M, King, RS and Stewart, G (2007) The design and manufacture of advanced 3D woven hybrid composite materials. POLYMERS & POLYMER COMPOSITES, 15 (8). pp. 597-604. [Journal article]

Stewart, G, McIlhagger, AT, Quinn, JP and King, S (2007) An investigation into the effect of compaction on the mechanical performance of a 3D reinforced advanced composite. POLYMERS & POLYMER COMPOSITES, 15 (7). pp. 535-543. [Journal article]

2006

Morgan, M, Quinn, JP and McIlhagger, AT (2006) The effect of weft density variation on tow geometry in woven reinforced composite materials. In: International Manufacturing Conference, Belfast. IMC Conference Proceedings. 5 pp. [Conference contribution]

2004

Rogers, PPJ, McIlhagger, AT, McIlhagger, R and Quinn, JP (2004) Stabilisation of 3D preforms with thermoplastic monofilament for advanced composite manufacture. POLYMERS & POLYMER COMPOSITES, 12 (6). pp. 511-517. [Journal article]

2003

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Editorial to: ICMAC conference - September 2001. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 469-473. [Journal article]

McIlhagger, R, Quinn, JP and McIlhagger, AT (2003) Guest editorial to ICMAC conference - September 2001. Composites - Part A: Applied Science and Manufacturing, 34 (6). pp. 469-473. [Journal article]

Quinn, JP, McIlhagger, R and McIlhagger, AT (2003) A modified system for design and analysis of 3D woven preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (6). pp. 503-509. [Journal article]

This list was generated on Tue Oct 21 09:04:05 2014 BST.