Ulster University Logo

Ulster Institutional Repository

The Influence of Through-Thickness Material Property Variation on Stretch Forming Springback

Biomedical Sciences Research Institute Computer Science Research Institute Environmental Sciences Research Institute Nanotechnology & Advanced Materials Research Institute

McMurray, R, Leacock, AG and Brown, D (2011) The Influence of Through-Thickness Material Property Variation on Stretch Forming Springback. Key Engineering Materials, 473 . pp. 436-443. [Journal article]

Full text not available from this repository.

URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.473.436

DOI: doi:10.4028/www.scientific.net/KEM.473.436

Abstract

Stretch forming is commonly used in the manufacture of low-volume convex aircraft panels. The gentle curvature and high degree of stretch leads to relatively low levels of elastic recovery post forming. Previous investigations [1] have shown that there is a large difference in the measured springback depending upon which side of an Alclad aluminium sheet is in contact with the tool surface. Initial investigation into the clad layer properties revealed no accountable variation in either thickness or strength. Instead the asymmetric springback behaviour was attributed to material property variations through the alloy core of the sheet. An analytical method for the prediction of the asymmetric springback incorporating the through thickness property variation is presented. Material strengths at specific through thickness positions were determined using a procedure based on residual strength measurements. The predicted results correlate well with the experimental data, which had initially demonstrated the asymmetric springback

Item Type:Journal article
Faculties and Schools:Faculty of Computing & Engineering
Faculty of Computing & Engineering > School of Engineering
Research Institutes and Groups:Engineering Research Institute
Engineering Research Institute > Advanced Metal Forming
ID Code:23275
Deposited By:Dr Alan Leacock
Deposited On:12 Sep 2012 10:46
Last Modified:12 Sep 2012 10:46

Repository Staff Only: item control page